[JDEV] MUC problems

David Sutton jabber at dsutton.legend.uk.com
Wed Feb 12 22:53:33 CST 2003


Hi Vapor.

  The problem with this is that there is no such thing as a fully
  anonymous room, and I think that it would cause too much distruption
  to the service if every time the change was made, the room had to
  freeze until everyone either agreed or left. If you allow the room
  just to continue, do you then have to keep individual room histories
  for everyone who decides to stay, to make sure they don't lose any
  messages?

Regards,

  David

On Wed, Feb 12, 2003 at 04:04:46PM -0600, Vapor wrote:
> What about having anonymous rooms that an admin can change to non-anonymous.
> When the change is made, all participants in the room are given the option
> to leave or have their JID revealed to the administrators.  They cannot send
> or recieved messages from that room until they either accept the change in
> the rooms status or leave.
> 
> This could then offer those abusing the oportunity to be revealed or leave
> on their own without necessarily being revealed.
> 
> Just a thought.
> Vapor
> ----- Original Message -----
> From: "Constantin Nickonov" <Nickonov at jabber.com>
> To: <jdev at jabber.org>
> Sent: Wednesday, February 12, 2003 3:00 PM
> Subject: RE: [JDEV] MUC problems
> 
> 
> > I understand what you're saying about backward compatibility, David. This
> > wasn't the intent of MUC, but is not prohibited, either. The problem is
> that
> > your implementation will likely become the de-facto reference
> > implementation, and future mimickers will attempt to stay true to what you
> > do now. In the long run, the result will be confusing at best. There's a
> > reason for the demise of the JCF protocol (for which there isn't a JEP)
> and
> > the introduction of MUC.
> >
> > The MUC protocol proposes a solid affiliation/role hierarchy, and I submit
> > to you that even in anonymous rooms, the owner/admin (and perhaps the
> > moderator) should still have access to everyone's real JID. And so, any
> > channel abuse issues, with which you're concerned, can be resolved without
> > employing an extra representation of the JID. And even if you want to
> allow
> > users to file complaints against someone who's being abusive while the cat
> > (admin, owner, etc.) is away, this can be accomplished via a message
> that's
> > intercepted by the service a la invitations sent through the room
> (MUC-0045,
> > section 6.6).
> >
> > Furthermore, some anonymity is lost when you track a SHA-hashed
> > representation of a user's JID (which never changes) -- even between
> > sessions. One could easily argue that this representation is every bit as
> > identifying of the user as his/her real JID. The idea behind anonymity is
> > that a user can come into a room and no one knows who the user is... not
> who
> > the user's been in the past... not anything about the user.
> >
> > > -----Original Message-----
> > > From: jabber at dsutton.legend.uk.com
> > > [mailto:jabber at dsutton.legend.uk.com]
> > > Sent: Wednesday, February 12, 2003 11:14 AM
> > > To: jdev at jabber.org
> > > Subject: Re: [JDEV] MUC problems
> > >
> > >
> > >
> > > Hello Constantin,
> > >
> > >   Yes, you can communicate via the SHA hash jid, if it is
> > > enabled in the
> > > configuration. This was also the same behaviour in the
> > > conferencing module
> > > available previously, and I know of people who have express
> > > concern to me
> > > to keep the browse ability as compatible as possible. The
> > > current method
> > > which I checked into CVS is the way that I want to keep it.
> > >
> > >   If you were in an anonymous room, then you would be able to
> > > track when a
> > > user changes nick, and I want the same functionality in browse.
> > >
> > >   I would also say that although you currently see no reason
> > > for tracking
> > > this way, it is a function that I would like, and can see
> > > others needing in
> > > the future. This becomes especially true in cases of channel
> > > abuse, and for
> > > that reason alone I believe that the SHA hash representation
> > > for anonymous
> > > users needs to stay.
> > >
> > > Regards,
> > >
> > >   David
> > >
> > > Constantin Nickonov writes:
> > > >
> > > > > -----Original Message-----
> > > > > From: David Sutton [mailto:jabber at dsutton.legend.uk.com]
> > > > > Sent: Wednesday, February 12, 2003 2:57 AM
> > > > > To: jdev at jabber.org
> > > > > Subject: Re: [JDEV] MUC problems
> > > > >
> > > > >
> > > > > Hi there,
> > > > >
> > > > >   I can understand your point as well, so have come up with this
> > > > >   compromise. When you browse a room, the jid given will be
> > > > > the room jid
> > > > >   + nick. What happens if you browse further depends on the
> > > > > room. If the
> > > > >   room is unanonymous, or you are a room admin, then you
> > > will see the
> > > > >   users real jid. If you are a normal user and not
> > > allowed to see real
> > > > >   jids, then you will see the SHA hash jid version. That way
> > > > > we keep to
> > > > >   the spirit of the jep, whilst allowing tracking of user->nick
> > > > >   relations.
> > > > >
> > > > >   This has been checked into the mu-conference cvs. Does this
> > > > > sound good
> > > > >   to you?
> > > >
> > > > And where else will the SHA-hashed version of the JID be
> > > used? Can clients
> > > > send directed messages, etc., to the SHA-hashed version? I
> > > really don't
> > > > see the need to "track people" in this way. In the end, if
> > > the room is
> > > > anonymous, a user shouldn't really be "trackable" when in
> > > it. If it's
> > > > non-anonymous, you have the real JID and don't need to
> > > complicate things
> > > > (which you've already conceded).
> > > >
> > > > The two-phase browse seems like a good idea, i.e., get the
> > > in-room JID
> > > > from a room browse, and then dig deeper for the user's real JID by
> > > > browsing to the in-room JID.
> > > >
> > > > >
> > > > > Regards,
> > > > >
> > > > >   David
> > > > >
> > > > > On Tue, Feb 11, 2003 at 10:28:55AM -0700, Constantin
> > > Nickonov wrote:
> > > > > > I understand what you're trying to do. The problem is that
> > > > > your methods
> > > > > > conflict with the intent of JEP-0045, which will eventually
> > > > > result in
> > > > > > fragmentation of the standard, i.e., when two or more
> > > > > implementations of MUC
> > > > > > accomplish the same thing in incompatible ways. Perhaps the
> > > > > JEP should be
> > > > > > more specific when it comes to laying out the 'jabber:iq:browse'
> > > > > > capabilities (which are being phased out in favor of
> > > > > disco), but it seems to
> > > > > > me the re-introduction of SHA-hashing for this purpose is
> > > > > not a good thing.
> > > > > >
> > > > > > Sure, you can talk about race conditions, like when I
> > > > > browse to get a list
> > > > > > of users and one of them chooses that moment to change his
> > > > > nick, making my
> > > > > > subsequent user-level browse requests invalid. But why not
> > > > > just return the
> > > > > > real JID (if it's allowed by the room) in the room-level
> > > > > browse result?
> > > > > > Something like this:
> > > > > >
> > > > > > SENT: <iq type='get' to='room at muc.server'>
> > > > > >         <query xmlns='jabber:iq:browse'/>
> > > > > >       </iq>
> > > > > > READ: <iq type='result' to='user at server/resource'
> > > > > from='room at muc.server'>
> > > > > >         <conference xmlns='jabber:iq:browse' name='room'
> > > > > type='public'>
> > > > > >           <ns>http://jabber.org/protocol/muc</ns>
> > > > > >           <user name='nick1' jid='user2 at server/resource'/>
> > > > > >         </conference>
> > > > > >       </iq>
> > > > > >
> > > > > > In the case of an anonymous room, the 'jid' attribute could
> > > > > be omitted (or
> > > > > > contain the in-room JID for that user, i.e.,
> > > > > 'room at muc.server/nick2').
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: David Sutton [mailto:jabber at dsutton.legend.uk.com]
> > > > > > > Sent: Tuesday, February 11, 2003 8:59 AM
> > > > > > > To: jdev at jabber.org
> > > > > > > Subject: Re: [JDEV] MUC problems
> > > > > > >
> > > > > > >
> > > > > > > Hello there,
> > > > > > >
> > > > > > >   We are both correct in this situation. The JEP does define
> > > > > > > how the jid
> > > > > > >   is to be handled for a presence packet, and
> > > > > MU-Conference follows
> > > > > > >   that. You will never see the SHA1 string in a
> > > presence packet.
> > > > > > >
> > > > > > >   On the other hand, the system of using an iq request, xmlns
> > > > > > >   jabber:iq:browse, to discover the room roster is not
> > > > > covered by the
> > > > > > >   JEP. In order to maintain sanity, I have opted to
> > > > > continue using the
> > > > > > >   existing methods. If you require to see the real jid,
> > > > > and you are
> > > > > > >   allowed, then browsing the SHA1 resource will reveal
> > > > > the true jid. I
> > > > > > >   have to use the sha1, since it allows you to track
> > > the user more
> > > > > > >   consistantly - as I tried to explain before, I could use
> > > > > > >   'girls at conference.localhost/NICK' for the nickname reported
> > > > > > > by browse,
> > > > > > >   the problem is that if users swap nicknames, I have no way
> > > > > > > of knowing
> > > > > > >   that is what happened. The SHA1 string is unique to
> > > that user.
> > > > > > >
> > > > > > > Regards,
> > > > > > >
> > > > > > >   David
> > > > > > >
> > > > > > > On Tue, Feb 11, 2003 at 08:12:16AM -0700, Constantin
> > > > > Nickonov wrote:
> > > > > > > > see below
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: David Sutton [mailto:jabber at dsutton.legend.uk.com]
> > > > > > > > > Sent: Monday, February 10, 2003 8:51 PM
> > > > > > > > > To: jdev at jabber.org
> > > > > > > > > Subject: Re: [JDEV] MUC problems
> > > > > > > >
> > > > > > > > <snip>
> > > > > > > >
> > > > > > > > > The hex string is actually a SHA1 hash of the users real
> > > > > > > jid. Its used
> > > > > > > > > to reference a user, but not reveal the true jid.
> > > If the room
> > > > > > > > > is set up to allow people to see the real jid, then
> > > > > just browse
> > > > > > > > >
> > > > > > > girls at conference.localhost/13c6a01dc31309e331c2b018640b9c03b85
> > > > > > > 34327 and
> > > > > > > > > it will show you the true jid. This also helps to keep
> > > > > > > compatability to
> > > > > > > > > existing clients that are used to this form with the
> > > > > > > > > groupchat/conferencing module. The real jid is used as
> > > > > > > the reference, as
> > > > > > > > > a person can keep changing their nick throughout a
> > > > > > > session, but they
> > > > > > > > > can't change their real jid
> > > > > > > >
> > > > > > > > The problem with this is that the MUC standard (JEP-0045)
> > > > > > > specifies how
> > > > > > > > nicknames are passed along with presence information, and
> > > > > > > how they are
> > > > > > > > changed -- and SHA-hashing isn't the way.
> > > > > > > >
> > > > > > > > Entering a room (JEP-0045, section 6.2):
> > > > > > > >
> > > > > > > >   SENT: <presence to='foo at muc.server/nick1'>
> > > > > > > >           <x xmlns='http://jabber.org/protocol/muc'/>
> > > > > > > >         </presence>
> > > > > > > >   READ: <presence from='foo at muc.server/nick1'
> > > > > > > to='user at server/resource'>
> > > > > > > >           <x xmlns='http://jabber.org/protocol/muc#user'>
> > > > > > > >             <item affiliation='owner'
> > > jid='user at server/resource'
> > > > > > > > role='moderator'/>
> > > > > > > >           </x>
> > > > > > > >         </presence>
> > > > > > > >
> > > > > > > > Changing the nick (JEP-0045, section 6.4):
> > > > > > > >
> > > > > > > >   SENT: <presence to='foo at muc.server/nick2'/>
> > > > > > > >   READ: <presence type='unavailable'
> > > from='foo at muc.server/nick1'
> > > > > > > > to='user at server/resource'>
> > > > > > > >           <x xmlns='http://jabber.org/protocol/muc#user'>
> > > > > > > >             <item nick='nick2' affiliation='owner'
> > > > > > > > jid='user at server/resource' role='moderator'/>
> > > > > > > >             <status code='303'/>
> > > > > > > >           </x>
> > > > > > > >         </presence>
> > > > > > > >         <presence from='foo at muc.server/nick2'
> > > > > > > to='user at server/resource'>
> > > > > > > >           <x xmlns='http://jabber.org/protocol/muc#user'>
> > > > > > > >             <item affiliation='owner'
> > > jid='user at server/resource'
> > > > > > > > role='moderator'/>
> > > > > > > >           </x>
> > > > > > > >         </presence>
> > > > > > > >
> > > > > > > > The MUC protocol wasn't designed to be fully
> > > > > > > backward-compatible with the
> > > > > > > > JCF draft.
> > > > > > > >
> > > > > > > > Constantin
> > > > > > > > _______________________________________________
> > > > > > > > jdev mailing list
> > > > > > > > jdev at jabber.org
> > > > > > > > http://mailman.jabber.org/listinfo/jdev
> > > > > > >
> > > > > > > --
> > > > > > > David Sutton
> > > > > > > Email: dsutton at legend.co.uk
> > > > > > > Jabber: peregrine at legend.net.uk
> > > > > > >
> > > > > > _______________________________________________
> > > > > > jdev mailing list
> > > > > > jdev at jabber.org
> > > > > > http://mailman.jabber.org/listinfo/jdev
> > > > >
> > > > > --
> > > > > David Sutton
> > > > > Email: dsutton at legend.co.uk
> > > > > Jabber: peregrine at legend.net.uk
> > > > > _______________________________________________
> > > > > jdev mailing list
> > > > > jdev at jabber.org
> > > > > http://mailman.jabber.org/listinfo/jdev
> > > > >
> > > > _______________________________________________
> > > > jdev mailing list
> > > > jdev at jabber.org
> > > > http://mailman.jabber.org/listinfo/jdev
> > >
> > >
> > >
> > > _______________________________________________
> > > jdev mailing list
> > > jdev at jabber.org
> > > http://mailman.jabber.org/listinfo/jdev
> > >
> > _______________________________________________
> > jdev mailing list
> > jdev at jabber.org
> > http://mailman.jabber.org/listinfo/jdev
> >
> 
> 
> _______________________________________________
> jdev mailing list
> jdev at jabber.org
> http://mailman.jabber.org/listinfo/jdev

-- 
David Sutton
Email: dsutton at legend.co.uk
Jabber: peregrine at legend.net.uk
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 232 bytes
Desc: not available
URL: <http://mail.jabber.org/pipermail/jdev/attachments/20030212/2a6dc2a4/attachment-0002.pgp>


More information about the JDev mailing list